A fish tank gravel calculator turns the floor of your aquarium into a shopping list: how many pounds of substrate to buy, which bags, and what they cost. The math is short. Multiply the inside length by the width and the depth you want, convert that to cubic feet, and multiply by how much the material weighs per cubic foot. Gravel runs about 105 lb per cubic foot, sand 97, and a volcanic aquasoil such as Fluval Stratum closer to 62. That spread is why one “pounds per gallon” rule can’t cover all three. A 20 long with 2 inches of gravel needs 43.8 lb, two 25 lb bags, $51.98 at PetSmart.

Fish Tank Gravel Calculator by Depth, Material and Bag Size
Enter your tank dimensions in inches or centimeters, pick the substrate type, and set the desired depth. Choose “sloped” if the bed rises toward the back glass, a common aquascaping layout, and the tool averages the substrate height at the front and back. The fourth option builds a planted bed in two layers: nutrient soil underneath, a cap of stone or sand on top.
Fish Tank Gravel Calculator
Enter the inside footprint of the tank and the depth you want, pick gravel, sand, aquasoil or a capped planted bed, and get pounds, bags and cost. Each material is weighed with its own bulk density, sloped beds use the average depth, and bags are the cheapest mix of two shelf sizes at September 2026 prices.
What to Buy for the Bottom of Your Tank
Estimates only. Pounds are bed volume times the dry bulk density of each material (Engineering ToolBox for gravel and sand, Fluval's 1 kg per liter sizing rule for aquasoil). Real products vary by grain size, so buy a bag extra if the bed must be exact. Prices are PetSmart regular prices reviewed September 2026 and change with sales.
This aquarium substrate calculator assumes a rectangular floor. For a bow front or another tank shape, enter the length and width at the widest points and treat the answer as a slight overestimate. Inside measurements are best; outside ones add a few percent, which is harmless.
Behind the result sits one chain of arithmetic. Footprint in square inches times average depth, divided by 1,728, gives cubic feet (centimeter entries are divided by 2.54 first). Cubic feet times the material’s weight per cubic foot, plus any extra percent you asked for, times the number of tanks, gives pounds. For a capped bed the cap is a uniform layer, so the soil base is the average depth minus the cap, and each layer gets its own density and its own bags. The tool also reports liters and the gallons of water volume the layer takes up.
The bag line is the cheapest mix of the two shelf sizes that covers your weight, bought once for every tank you entered. Every combination of large and small bags gets priced, the cheapest wins, and ties go to fewer bags. Those prices come from PetSmart product pages on September 30, 2026: Top Fin aquarium gravel at $7.99 (5 pounds) and $25.99 (25), Top Fin sand at $9.99 (5) and $29.99 (20), and Fluval Stratum at $16.99 (8.8) and $35.49 (17.6). The 8.8 lb Stratum bag was cheaper per pound than the 17.6 lb bag on that date, which may be a promotion, and other retailers and colors run a dollar or two apart.
How Much Substrate Do You Need for Common Tank Sizes?
At a flat two inches, a 10 gallon needs about 24 lb of pea gravel, a 20 long or 29 about 44 lb, and a 55 about 76 lb. The footprints below are outside dimensions from Top Shelf Aquatics’ size chart. Each cell is the weight in pounds, then the cheapest PetSmart order.
| Tank | Footprint (in) | Gravel (pounds, cost) | Sand | Aquasoil |
|---|---|---|---|---|
| 10 gallon | 20 x 10 | 24.3, $25.99 | 22.5, $39.98 | 14.5, $33.98 |
| 20 high | 24 x 12 | 35.0, $41.97 | 32.3, $59.96 | 20.8, $50.97 |
| 20 long or 29 | 30 x 12 | 43.8, $51.98 | 40.4, $69.97 | 26.0, $50.97 |
| 40 breeder | 36 x 18 | 78.8, $85.96 | 72.8, $119.94 | 46.8, $101.94 |
| 55 gallon | 48 x 13 | 75.8, $85.96 | 70.1, $119.94 | 45.1, $101.94 |
| 75 gallon | 48 x 18 | 105.0, $111.95 | 97.0, $149.95 | 62.4, $135.92 |
A 20 long and a 29 need exactly the same amount. Height doesn’t matter here, only the tank footprint. That’s also why a 40 breeder takes more than a 55: its floor is 648 square inches against 624. Aquarium size in gallons is a poor guide for the same reason, and the gap widens on larger tanks built tall rather than long.
Why an Inch of Sand, Stone and Soil Weighs Differently
Bulk density is the weight of a loose, dry pile of material per unit of volume, air gaps included. It’s the only number that turns a depth into a weight. Engineering ToolBox’s density table lists dry gravel at 105 lb per cubic foot (1,680 kg per cubic meter) and dry sand at 97 (1,555). Fluval sizes Stratum at 1 kg per liter of bed, which works out to 62.4 lb per cubic foot. Porous volcanic soil is mostly air.
| Material | Pounds per cubic foot | Pounds per inch over a 30 x 12 footprint | Shelf price per pound |
|---|---|---|---|
| Pea gravel | 105 | 21.9 | $1.04 (25 lb bag) |
| Sand | 97 | 20.2 | $1.50 (20 lb bag) |
| Aquasoil | 62.4 | 13.0 | $1.93 (8.8 lb bag) |
Read the last two columns together. Aquasoil costs almost twice as much per pound as pea gravel but weighs 40 percent less, so an inch of it costs only about a tenth more. Aquarium sand is the expensive one per inch, roughly a third more than stone, because it’s nearly as dense and priced higher. Top Shelf Aquatics’ calculator, typical of the tools ranking for this search, applies one band of 85 to 105 lb per cubic foot and has no soil option. Used for volcanic soil, that band over-orders by a third or more.
Soil density is still the softest number in the tool. Fluval’s sizing rule implies 1 kg per liter; one retailer’s bag guide works out nearer 0.85, so the Stratum result may run 10 to 15 percent high. The other two figures are dry construction aggregate, and coated craft stone or very fine sand can land 5 to 10 percent either way. Aragonite sand, the calcium carbonate sand used in reef tanks to buffer water toward alkaline pH, has no setting of its own. Use the sand setting to get an estimate, then check the bag’s coverage chart before buying the last bag.
Picking a Target Depth Before You Buy
Pick the depth first, then let the weight follow; that’s exactly how much substrate you need, and the right depth depends on your livestock and plants. Bag labels and shopping lists quote pounds per gallon because everyone knows their tank size, but those rules ignore shape and land at very different depths:
- 1 lb per gallon (Aquarium Co-Op’s shopping list) gives a 55 about 55 pounds, which is 1.45 inches of gravel. Fine for a fish-only community tank.
- 1.5 to 2 lb per gallon (printed on the Top Fin bag) gives 82.5 to 110 lb, or 2.2 to 2.9 inches on the same floor.
- 1 to 2 lb per gallon (the Top Fin sand bag) spans a factor of two by itself.
Fish-only and community tanks
About 1-2 inches does the job. That gives beneficial bacteria, the microbes that turn ammonia and nitrite into less toxic nitrate, enough surface to support the biofilter, and it stays shallow enough to vacuum during water changes. A deep layer of fine sand in a freshwater tank can trap rotting waste, so if you go deeper, stir it now and then.
Planted tanks and aquascapes
Use 2 to 3 inches where rooted plants grow, and a slope from about two inches at the front to 4 at the back for a planted aquascape. The sloped option averages the two, so a 2 to 4 inch slope costs the same as a flat 3 inch bed. Hardscape changes the order too: a big stone set before the substrate goes in saves material, while one set on top saves nothing.
Reef tanks and deep sand beds
Saltwater keepers split two ways. Many reef tanks run about an inch of aragonite sand for looks and easy cleaning. A deep sand bed, usually 4 inches or more, is built so its lower layers host bacteria that break down nitrate. Sand bed depth is the only input that changes between the two, so enter whichever you plan as the desired height and read the weight.
Deep beds lose water column too. On a 55 every inch of substrate costs about 2.7 gallons of aquarium volume, which the fish tank volume calculator subtracts when it works out real water for dosing.
Sand, Slopes and Capped Beds Priced Side by Side
Each row is what the tool shows for those inputs, and the same scenarios run in its automated test file.
| Setup | Bed | Weight | Cheapest order | Compare |
|---|---|---|---|---|
| 20 long, flat 2 in pea gravel | 30 x 12 in, 0.417 cu ft | 43.8 lb (19.8 kg) | Two 25 lb bags, $51.98 | 10% extra for a hill: 48.1 lb, still two bags |
| 55 gallon, 2 in sand | 48 x 13 in | 70.1 lb | Three 20s plus three 5s, $119.94 | Same bed in stone: 75.8 lb, $85.96 |
| 40 breeder, Stratum sloped 2 to 4 in | 36 x 18 in, 1.125 cu ft (31.9 liters) | 70.2 lb | Eight 8.8 lb bags, $135.92 | Stone at the same shape: $129.95 |
| 29 gallon, 2 in Stratum under a 1 in cap | 30 x 12 in | 26.0 + 21.9 = 47.9 lb | Three 8.8s ($50.97) plus one 25 ($25.99), $76.96 | All soil $84.95, all stone $77.97 |
| Metric tank, 5 cm sand | 60 x 30 cm, 9.0 liters | 30.8 lb (14.0 kg) | One 20 plus three 5s, $59.96 | Same math, metric inputs |
Three rows carry a lesson. Choosing sand for the 55 adds $33.98; plenty of keepers pay it for corydoras and other bottom dwellers that sift through fine grains, but it’s a real line item. Soil on the 40 breeder costs only $5.97 more than stone, which surprises people who assume soil is the luxury option. The capped 29 lands within a dollar of an all-stone bed while giving roots a nutrient layer.
Two smaller points. If your base is organic potting soil instead of Stratum, buy it by volume: the tool shows 12.5 quarts for that 2 inch base. Set up two identical 20 longs in one order and the cheapest mix becomes three 25s and three 5s, $101.94, two dollars under buying each tank’s bags separately.
Gravel or Sand: Cost and Care Trade-Offs
Price per inch is only one input. Aquarium Co-Op’s planted tank guide makes three practical points worth weighing before you choose your substrate:
- Nutrient soils run out. Active substrates like ADA Aqua Soil Amazonia, UNS Controsoil and Stratum lower pH and soften water, then are spent after one to two years and need root tabs. Plan on that recurring cost.
- Inert planted gravels last. CaribSea Eco-Complete and Seachem Flourite don’t break down, and root tabs turn them into a feeding bed for Amazon swords when needed.
- Grain size matters for roots. Very fine sand compacts and fights roots, coarse sand works, and large river stones leave gaps too wide for plants to anchor. Check the sand type on the label, not just the color.
If plant growth is the goal and the budget is tight, the capped bed is the middle path: nutrient soil where roots feed, a cheaper cap where you see it. A cap also keeps soil from clouding the water, and it works as long as you rarely uproot plants.
Stocking choices feed back into this. Keepers of bottom sifters usually use sand, and the fish stocking calculator will tell you how many of them the tank can hold. Heater sizing doesn’t depend on the substrate, but it’s the next purchase on most setup lists, so the aquarium heater size calculator is a sensible next stop.
Rinsing and Adding Substrate to a New or Established Tank
Rinse pea gravel and sand until the water runs clear before they go into a new fish tank, even bags labeled pre-washed. Dust and small particles are what leave the water cloudy for the first day or two. Stratum is different: Fluval’s directions say to rinse it gently in a colander without agitating it.
Topping up a running tank works if you go slowly. Lower rinsed material to the bottom in a cup instead of pouring it through the water, and run the calculator with only the extra depth, not the full bed. Leave the old layer in place, since it holds much of the tank’s bacteria.
Start by measuring the floor inside the glass, decide on a target depth before you think about weight, and run both your first choice and plain pea gravel through the fish tank gravel calculator. The price check line shows what the upgrade really costs for your footprint.
Frequently Asked Questions About Aquarium Substrate
How do I work out how much gravel I need for my fish tank?
Multiply inside length by width by depth in inches, divide by 1,728 for cubic feet, and multiply by 105 for pea gravel. A 30 x 12 inch floor at 2 inches deep is 0.417 cubic feet, about 43.8 lb.
How many pounds of gravel do I need for a 20 gallon aquarium?
It depends on which 20. A 20 long (30 x 12 inches) needs 43.8 lb for 2 inches; a 20 high (24 x 12) needs 35.0 lb. Two 25 lb bags cover the long, one 25 plus two 5s the high.
How many pounds of gravel do I need for a 55 gallon aquarium?
About 75.8 lb for 2 inches on a standard 48 x 13 inch floor, bought as three 25s and one 5 for $85.96. Each extra inch adds 37.9 lb.
How much will a 50 lb bag of gravel cover?
Fifty pounds of pea gravel fills about 0.48 cubic feet, roughly 823 cubic inches. That’s 2.3 inches over a 30 x 12 floor or 1.3 inches over a 55’s 48 x 13 floor.
Is sand or gravel better for an aquarium?
Gravel is cheaper per inch. Sand suits fish that dig or sift and costs about a third more for the same depth at September 2026 shelf prices. Coarse sand grows plants better than very fine sand.
Does a fish tank gravel calculator work for sand and aquasoil?
Only if it uses a separate density for each material. This one applies 105 lb per cubic foot for gravel, 97 for sand and 62.4 for aquasoil. A substrate calculator that uses one figure for every material over-orders the soil by a third or more.
Does aquarium substrate need replacing?
Stone, sand and inert planted gravel don’t wear out. Nutrient soil such as Stratum is exhausted after one to two years and then needs root tabs, or replacement if it has broken down into mud.
This page is general information, not veterinary advice. Bulk densities come from Engineering ToolBox (gravel and sand) and Fluval’s Stratum sizing rule; substrate guidance from Aquarium Co-Op; tank footprints from Top Shelf Aquatics; bag prices from PetSmart product pages checked September 2026, which change with sales. Last reviewed: September 2026.
